HOLEMAKER TECHNOLOGY 209010-0105 VERSADRIVE COBALT DRILL BIT 10.5MM

Simply the best long-life twist drill bits for Metal

VersaDrive® Cobalt Drills are a premium grade 8% Cobalt drill bit with fully ground flutes, 135° Split point and Titanium coating for faster drilling & reduced wear.

Suitable for heavy fabrication use, this Cobalt drill bit can also be used to drill stainless steel, mild steel, cast iron and a wide range of other structural materials.

VersaDrive® Drill Bits have a patented non-slip, Hex shank suitable for use in any standard 1/2" drill chuck for cordless or pistol drills or used with a VersaDrive® Rapid Lock adapter for use in a wide range of power tools such as Magnetic Drills.

Product Benefits

• Fast drilling with minimal kickback
• Dual hardened for impact wrench use up to 10.5mm
• Precision Ground Flutes
• Easy chip clearance
• 8% Cobalt for long life and endurance
• 135º Split Point for easy starting and high accuracy
• GoldMax low-friction titanium coating to stop burn out
• High Strength, Non-Slip Shank Design

Quick Guide

• Optimum life and performance when used with rotary pistol drills
• Up to 10.5mm can be used on impact wrench & impact drivers for fast cutting performance
• Suitable for use on stainless steel and harder materials if used at low RPM in Rotary tools
• Use appropriate lubrication and correct RPM to achieve long tool life

VersaDrive Cobalt Drill Bits FAQ Section

Q: Can I use VersaDrive Cobalt Drills in my impact wrench?

VersaDrive Cobalt Drills are not recomended for use with an Impact wrench above 10mm. However for best performance with impact we recommend the VersaDrive TurboTip Drill bits.

Q: Can I use VersaDrive Cobalt Drill bits for drilling stainless and other hard materials?

VersaDrive Cobalt Drill Bits are suitable for drilling stainless steel when used at lower RPM speeds in rotary drills. They can be used for drilling Stainless Steel with an Impact wrench, however reduced life expectancy would be expected. For optimum tool life We recommend using reduced rotary RPM speeds, increased pressure and additional lubrication.

Q: Which Lubricant do you recommend for VersaDrive Cobalt Drill Bits?

Speedlube is generally the best all purpose lubricant, for fast, convenient and accurate aerosol application ensuring coverage inside the hole as well as on the tool. However our BioCut paste is very popular and efficient lubricant for dipping the tool directly into the tin. It’s also great for minimising run off or mess, on painted surfaces or other sensitive applications where run off is to be avoided. Aeropaste can be used if working in applications such as Overhead where a fluid lubricant will run off. Finally BioCut Blue cutting fluid works particularly well with harder materials or difficult applications and is ideal forfor direct application onto the tool and into the hole when working on flat surfaces.

Q: How can I access further technical support or submit a warranty claim for my VersaDrive Drill Bit?

Please click here to access our product support area and warranty claim forms. If making a warranty claim please fill in the appropriate warranty form, providing us with as much of the requested information as possible and one of our technical team will review the feedback and be in touch shortly.

Best Practice Advice - How to get the best out of your 209010 Cobalt drill bits

• Follow guidelines to set correct RPM speed. Incorrect RPM can lead to poor life or tool breakage
• Apply firm, steady feed pressure throughout the cut
• Avoid lateral movement or tilting which can cause damage to the tool
• Ensure regular application of quality cooling lubricant, especially when drilling thick or hardened materials.
• Hardened or heat-affected materials may require higher torque, reduced RPM and feed rates and extra coolant
• VersaDrive Drill Bits up to 10mm diameter can be driven by an Impact wrench (in rotary mode only)

How to decide which Impact Wrench or Impact Driver to use?

• Identify the torque range (for the cutting tool) required using the data sheet in question 2.
• Identify the torque range on your impact wrench or impact driver
• Look up model number to see torque range
• Check if there are speed/torque settings on the tool - Example
• Select the closest torque setting on the impact wrench/impact driver ABOVE the torque recommendation
• (this is for the following 2 reasons)
• - Higher torque will only be used on demand
• - Too low torque will lead to the tool jamming or even snapping as the flutes stop cutting and the torque transfers to the tool

N.B. VersaDrill Drill Bits are only recommended for use on Impact up to 10mm diameter. Above 10mm Rotary drive tools are recommended.

VIDEOS

VersaDrive® Drill Bits - the best long-life twist drill bits for Metalworking

VersaDrive® 1\4" Impact Driver Adapter (Replaced by 111026-014A VersaDrive Rapid Lock 1/4" Adapter)

HMT VersaDrive® COBALT DRILL BITS 2018 Overview